Take the Tour first
Click Tour in the top bar. It shows each part of the screen and what it does, step by step. Two minutes, and you know your way around.
Power tips for using Pack Mule effectively and efficiently, and all keyboard shortcuts.
Click Tour in the top bar. It shows each part of the screen and what it does, step by step. Two minutes, and you know your way around.
Hover over anything in Pack Mule when you need help. The device badge, the firmware, the CPU value, the slot states and every button explain themselves.
Select a patch and press Space to open Patch Details: modules, I/O, MIDI, CV, expression pedal, firmware and notes. It works in Source, in your set and in the patchstorage results. Double-click does the same.
Space · Enter
Undo takes back every change, one step at a time. A whole update from an SD card export is a single step.
Ctrl+Z
Every save adds a new version to the set file, with the date, your notes and a changelog. Check out the Version pulldown on the right side to see the current version you are working on, or select an earlier version from the history. You can always go back to any version you saved in the past.
Ctrl+S
Shift+click selects a range, Ctrl+click adds or removes a single patch.
Press on an empty part of a list and drag: every row the frame touches is selected. On a row, hold Shift to start a frame there. Hold Ctrl as well to keep what is already selected.
Ctrl+A selects all rows of the list you are in. In Source, Select All Patches does the same.
Ctrl+A
Esc clears the selection, and so does a click on an empty part of a list.
Esc
Drop one patch on a slot to replace the patch there. Drop it between two slots to insert it: the slots below move down by one.
A group never replaces anything. It goes in where you drop it, in its order, and the slots below make room.
Drag one patch from Shelved onto a slot: the two swap places, without a question.
When the 64 slots are full, the extra patches move to Shelved. Pack Mule tells you how many fit and asks first.
Press Delete. Remove takes the patch out together with its slot, and the slots below move up. Empty leaves an Empty slot, and nothing moves.
Delete · Backspace
Choose how in the pulldown next to Sort:, by name, type, device, CPU, source or when the patches were added, and click Sort:. With nothing selected the whole set is sorted; with two or more patches selected, only those. Click again to turn the order around. Locked and Empty slots stay where they are, and patches that are equal keep their order, so sort by name first and then by type to get each type in A–Z order.
Duplicate puts a copy of the selected patch into the next Empty slot below it, or into Shelved if there is none.
An Empty slot gets the empty patch on the device. A Locked slot gets no file at all, so the patch already on the device stays. Switch with the button on the row.
Select several Empty slots, or several Locked ones: the button on one of them switches all of them.
The bar on top of the set entries is a map of your 64 slots and Shelved: every slot in its place. Point at it to see the slot and its patch, click to jump to that slot in the list.
The filter field above a list looks at patch names, file names and tags.
In Source, sort by slot. Or sort by name, file name or type to find doubles and gaps.
In the patchstorage tab, combine words, Tags…, the state (Ready to Go or Work in Progress) and a sort: relevance, newest first, recently updated, most liked, most downloaded, most viewed or title.
In Tags…, tick Match all selected tags: only patches that have every tag you chose are shown.
In Tags…, click a tag once to ask for it (green), twice to leave it out (dark red, with a minus), three times to clear it. Patches with a left-out tag are never shown, whatever Match all selected tags says. Factory and Zoiatheca are search words, so they are only on or off.
Some uploads are a .zip with several patches. Open ZIP shows them one by one, so you take only the ones you want.
Each row says ZOIA, EUROBURO, BOTH or MIXED. Hover over the badge to read what it means for your set.
Each patch shows the firmware it needs at least, and the set says which firmware your device must have. CPU turns orange near the limit and red when a patch may not run.
A damaged patch is marked and cannot go into the set. Files that are not a patch at all are left out, with a note.
In Patch Details, open the Patch Map: every page and every module of the patch on one screen.
Select a patch, click Compare…, then click the second one: in your set, in Source or on patchstorage. With two patches selected, Compare opens right away.
Hide cosmetic changes leaves out names, positions and colours. Swap Columns turns A and B around.
Compare Patch Maps shows the map of A above the map of B.
Copy as text copies the whole comparison for your notes or a message.
Pack Mule uses one .pmule file for each set and stores everything that belongs to it: all patches, the history with every version of the set, notes and comments. Think of the .pmule file as your big desk with all the patches, information and notes of a single set. Open it with Open Set File whenever you want to change or check something, or to export the patch files of the set to your ZOIA or Euroburo.
Once you have exported a set to your SD card, you can import it on your ZOIA or Euroburo at any time. There is no need to export it again unless you made changes or updates.
An earlier version opens read only, so nothing can change by mistake. Click Export to SD Card to put exactly that set back on your ZOIA or Euroburo.
Set Info holds the name, what the set is for, the author, notes and a web link. All of it goes into the set sheet.
Chrome and Edge refuse to open or save into some folders, for example your user folder, and say the folder contains system files. Nothing is wrong with Pack Mule or your set. Choose an empty folder, or a folder that holds only your .pmule set files and patch files (.bin).
In Chrome and Edge, Save, Open and Export start in the folder you used last.
Open a folder made with Patches to SD: Pack Mule sees that it is an export of your device and offers to create a set from it, or to update your set.
An export always has 64 files; empty slots are saved as nnn_zoia_.bin. If a file is missing or doubled, Pack Mule tells you which.
Update Set… lists just the slots that differ. Choose Keep Current or Replace for each; a replaced patch moves to Shelved.
Open the folder backup_zoia from your SD card under Local. Every import saved the patches it replaced there. Each backup opens like a ZIP; drag patches or a whole backup into your set.
Export writes a folder named after the set and its version, for example StudioMarch-03. Keep as many sets on the card as you like.
Every time you export the patches to the SD card, a complete set sheet of your set is created and stored next to the patches on the SD card (README.html). Never wonder again what a folder with patches on your SD card was for, or where the patches came from. It lists every slot with its name, type, device, firmware, what it uses and where it came from. Print it for the gig.
Put the set folder at the top level of the card, with the .bin files directly inside. The card must be FAT32 (on a Mac: “MS-DOS (FAT)”). The quickest way: Shift + Config, Format SD on the device. It erases the card.
Press Shift+Config to open the Config Menu, choose Patches from SD and pick the set folder. The device keeps a backup of every patch the import overwrites.
| Ctrl+S | Save the set |
|---|---|
| Ctrl+Z | Undo |
| Ctrl+Shift+Z or Ctrl+Y | Redo |
| Delete or Backspace | Delete the selected patches (Remove or Empty) |
| Ctrl+A | Select all rows of the list you are in |
|---|---|
| Shift+click | Select a range |
| Ctrl+click | Add a patch to the selection, or take it out |
| Shift+drag | Draw a frame, starting on a row |
| Space or Enter | Open or close Patch Details |
| Esc | Close a window, end Compare picking, clear the selection |
Ctrl is Cmd on a Mac.