Organize
Tidy up your device, start from scratch, compare patches and share your sets.
1Clean up your ZOIA or Euroburo
- On your ZOIA or Euroburo, press Shift + Config and choose Patches to SD from the Config Menu. This saves all 64 slots to your SD card. Put the card in your computer.
- In Pack Mule, click Open Folder… and select the folder you exported. Pack Mule shows “This folder looks like a ZOIA export”. Click Create a New Set from This Export. All 64 slots are now in a new set, just as they were on your device.
- Now clean up: drag patches to put them in order, or move the ones you're not sure about to Shelved. Use Delete to clear things out: Remove takes out the patch and its slot, moving everything below it up. Empty clears the patch but keeps the slot in place. Use Sort: to put the whole set in order, for example by type.
- Click Save Set File, then Export to SD Card, and choose your SD card.
- On your ZOIA or Euroburo, press Shift + Config, choose Patches from SD, and import your set folder. Done! You'll also find a
README.htmlin the folder, listing every slot. Open it or print it, so you always know what goes where.
2Need an empty ZOIA or Euroburo?
- Click New Set. All 64 slots start as Empty.
- Click Save Set File and give your set a name, like “Empty”.
- Click Export to SD Card and choose your SD card. Pack Mule writes an empty patch file for each of the 64 slots, just as your device would.
- On your ZOIA or Euroburo, press Shift + Config, choose Patches from SD, and import the folder. All 64 slots are now empty.
3Compare two patches
- Select a patch from your set or Source, then click Compare… in the top bar. This is patch A.
- A message at the bottom asks you to pick a second patch. Choose one from your set, a folder you open, or patchstorage. This is patch B. Press Esc or click Cancel to stop. If you've already selected two patches, Compare opens right away.
- At the top of the window, you'll see how similar the two patches are, for example “Related patch · 93 % the same”, with separate scores for Modules, Connections and Settings. If the patches have little in common, Pack Mule shows just the summary. Click Show all differences to see the details anyway.
- The table shows patch A on the left and patch B on the right. Each row highlights a difference, such as New module, Connection removed or Connection level is higher. The part that changed is marked in dark yellow. Click ▸ to explore the settings, connections and stars of any new or removed module.
- Hide cosmetic changes hides changes to names, module positions and colours. Swap Columns switches A and B around. Compare Patch Maps shows both patch maps, one above the other, so you can spot differences at a glance.
- Click Copy as text to copy the whole comparison. Handy for notes or sharing with someone.
Manage
Build sets for any occasion, keep your patches safe and load them onto your device.
5Build a set for a live show
- Click New Set, then Set Info. Give your set a name, like “Live, 14 March”. Add what it's for and, if you like, some notes and a web link.
- Under Source, click Open Folder… or Open ZIP or files…. You can also drag files, folders or ZIP files straight into the Source list.
- Drag the patches you want onto the slots on the right. Drop a single patch onto a slot to replace what's there, or between slots to insert it. If you drag several patches at once, they're always inserted. If all 64 slots are full, the last patches move down to Shelved. Pack Mule asks before doing that. The bar under Your Set shows how full the slots and the shelf are.
- Leave slots you don't need as Empty. Set a slot to Locked if you want to keep whatever is already on your device.
- Click Save Set File. If your set doesn't have a name yet, Pack Mule asks for one. It saves a
.pmulefile, and each save with changes adds a new version.
6Build a guitar multi-effects set
- Click New Set, then Set Info. Give your set a name, like “Guitar Rig”.
- Open your guitar patch folders, or search the patchstorage tab. Try the Guitar tag to find more patches.
- Drag your patches into the slots in the order you want to switch between them on stage: drive, modulation, delay, reverb, looper.
- Check how much CPU each patch uses and which firmware it needs. Each row shows what a patch uses, such as MIDI, CV or an expression pedal. Press Space to see all its inputs and outputs in Patch Details.
- Click Save Set File, then Export to SD Card.
7Build a set to try out new granular patches
- Under Source, open the patchstorage tab. Click Tags… and choose Granular, or simply search for “granular”. Sort by date to see the newest patches first.
- Each row shows the device type: ZOIA, EUROBURO, BOTH or MIXED. Hover over the label to see what it means for your set.
- Some uploads come as ZIP files with several patches inside. Click Open ZIP to explore them one by one.
- Drag a patch onto a slot, or several patches between slots. Pack Mule downloads and checks them. The bar under Your Set shows the progress. Patches marked Damaged can't be added to your set.
- Hover over a patch to see its categories and description, or press Space to open Patch Details. Pack Mule keeps the patch's author, license, links and tags. You'll find them in your set's README under “From patchstorage”.
8Protect patches on your device with Locked
- Do you use some slots on your device for your own experiments, say 000–009? Set those slots to Locked in your set.
- Pack Mule doesn't export a patch file for Locked slots. When you load the set onto your ZOIA or Euroburo, whatever is already in those slots stays untouched.
- Just to be safe, export the patches on your device to an SD card first and import the SD card folder as a set in Pack Mule (see Turn an SD card export into a set).
9Export your set to SD card and load it onto your device
- Click Save Set File first. The Export to SD Card button only works once your set has been saved.
- Click Export to SD Card, then Choose SD Card… and select your card. Pack Mule creates a folder named after your set, like
StudioMarch-03. It contains one patch file per slot (except Locked slots) and aREADME.htmlyou can read or print as a set sheet. Wait until Pack Mule finishes, then safely eject the SD card before removing it. - Keep as many sets on your SD card as you like: one for gigs, one for the studio, one for practice. Just load the one you need.
- Does your set use WAV samples? You'll find them listed in the README. Just copy them to your SD card yourself.
- If your browser can't write folders directly, click Save ZIP…. Unzip the file on your computer, then copy the set folder to the top level of your SD card. Your device reads folders, not ZIP files.
- Make sure your SD card is formatted as FAT32, not exFAT. On a Mac, FAT32 is called “MS-DOS (FAT)” in Disk Utility. Or format the card right on your ZOIA or Euroburo: press Shift + Config and choose Format SD. Formatting erases everything on the card, so copy anything you want to keep to your computer first. Remove any firmware update file from the card unless you want to update the firmware.
- On your ZOIA or Euroburo, press Shift + Config and choose Patches from SD. Select the set folder you want to import. Before it imports, your ZOIA or Euroburo saves every patch it is about to overwrite into a backup folder on the SD card.
Backup
Keep the changes you made on your device, turn SD card exports into sets, get back what an import replaced and go back to any version in the history of a set.
10Bring changes from your device back into your set
- You've changed some patches on your ZOIA or Euroburo and want to keep those changes in your set. On your device, press Shift + Config and choose Patches to SD from the Config Menu. This saves all 64 slots to your SD card. Put the card in your computer.
- Click Open Set File and choose the
.pmulefile for the set currently on your device. - Click Open Folder… and select the folder you just exported. Pack Mule shows “This folder looks like a ZOIA export” and how many patch names match your set. Click Update Set… to see what's changed.
- A window shows only the slots that differ: different settings, a new name, a different patch, a patch that's new on your device, or a Locked slot that now contains a patch. Click the small text below a row to see exactly what's different.
- For each row, choose Keep Current or Replace (Add for an Empty or Locked slot). Pack Mule doesn't choose for you, and there's no Replace All. Replaced patches move to the top of Shelved, so nothing gets lost.
- Click Apply to update your set. One Undo takes the whole update back. Then click Save Set File. This adds a new version to your set, and the history shows what changed.
11Turn an SD card export into a set
- Nothing exported yet? On your ZOIA or Euroburo, press Shift + Config and choose Patches to SD. This saves all 64 slots to your SD card.
- Insert your SD card into your computer.
- Click Open Folder… and select the exported folder. Or just drag the folder into the Source list.
- Pack Mule shows “This folder looks like a ZOIA export” and checks what's in each slot: a patch, an empty patch or a damaged file. An export with Patches to SD always contains all 64 slots.
- Click Create a New Set from This Export. All 64 slots are copied into a new set, exactly as they were on the card. Or click Select All Patches and drag the patches into an empty set yourself.
- Set Info opens with the folder name already filled in as the set name, along with a short note. Add when you exported it and which device it came from. Then click Save Set File. Your patches now have a name, notes and a history.
12Get back the patches an import replaced
- Each time you import patches with Patches from SD, your ZOIA or Euroburo first saves the patches it is about to replace. They go into the folder backup_zoia on your SD card, one numbered folder per import. The highest number is the newest.
- Insert your SD card into your computer, click Open Folder… and select backup_zoia. Or drag the folder into the Source list.
- Pack Mule lists the backups, newest first, with how many patches each one holds. Click ▸ 64 patches to open a backup and see its patches on their slots.
- Drag single patches into your set, or drag the whole backup row to bring all its patches at once.
- A backup with all 64 slots can become a set of its own: open it and click New Set from This Backup.
- Your device keeps at most 256 of these backups. Pack Mule shows how many are used, for example “33 of 256 device backups used”.
13History: which version did you use, and when?
- Every time you save changes with Save Set File, Pack Mule adds a new version to your set file, including the date, your notes and a changelog.
- Open the Version menu above your set and choose an older version. It opens in read-only mode.
- To bring that version back onto your device, click Export to SD Card while it's shown. Pack Mule exports it as its own folder.
- To keep working on your set, switch back to Version: Current.